Sitemap|E-mail:lemon@szlbt.net
T260S series industrial grade wireless router communication products which are based on 3G and 4G internet requirements and developed by Shenzhen Libtor Technology co.ltd. They are mainly applied for data transmission of industrial users and support transparent data transmission, picture transmission , equipment monitoring and wirelessrouter internet functions.
Charpter 1 Specification
T260S series industrial grade wireless router communication products which are based on 3G and 4G internet requirements and developed by Shenzhen Libtor Technology co.ltd. They are mainly applied for data transmission of industrial users and support transparent data transmission, picture transmission , equipment monitoring and wireless router internet functions.
T260S use 32 bit processors , it can process protocols and a large amount of data in a high speed . It also can match with many types of industrial modules for 3G /4G internet .(3G:WCDMA/EVDO/TD-SCDMA, 4G:TD-LTE/FDD-LTE ) .Providing 10/100M Ethernet network port ,WIFI wireless connector ,serial port ,USB connector for connecting many kinds of terminal equipments .
Supporting Web configuration , easy management and remote message control .
Application
Electronics, Oil industry, Mineral, Finance, Communication, Public security, Heating, Industrial control, Meteorology, Water conservancy, Public transportation, local council and so on .
Feature:
1: Adopt high grade industrial wireless module.
2:Support 3G(WCDMA/CDMA/TD-SCDMA),4G(FDD-LTE/TD-LTE).
3: Adopt metal case, IP30 protection grade.
4: Wide voltage and current input: DC6-35V/3A;
5: Anti-reverse power connection protection,surge protection,ESD antistatic protection .
6: Software and hardware watch dog design , support anticrash functions.protect equipment work stable and reliable.
7:Automatic detection when network disconnects,automatically restart when dailing fails, scheduled reboot etc.
8: Serial transparents transmission function, It can access to order control mode by serial port , control router and other equipment .
9: SMS contol dialing , offline and restart function
10: Support socket server and customer end mode.
11:Supporti different types of DDNS service.
12:Port mapping ,DMZ host function
13: Support VPN, PPTP client,L2TP client.
14: Support ads pushing function by customer end vertification.
2 Function Introduction
1: Software function
Connection way | 3G/4g connection, DHCP/Static IP/PPPoE |
User quantities | Wire:253,Wirless:30 |
Operation system | Windows XP/VISTA Linux 2.6 Windows 7 MAC OS : 10.3.7and above |
Browser | IE:6.0 and above Safari:1.2.4 and above Firefox:2.0.0.8 and above |
Security Management | Fiewall setting:Protect the computer in the local area network purposed attacking from Internet MAC filtraction:Prohibition MAC address already added Access control:control the right of access to computer in LAN. Port restriction:Stop some virtus according to some port from connection at one time . Stop DOS attack. |
Server | Virtual server:set inner service server and provide user to access DMZ :when you need set the opening port of virtual server is not sure, you can set it into DMZ host. Port trigger: it can realize WIFI router open to the inner service port automatically by accessing to the port of Internet Serial port service:realize the serial port transit transparently ,AT order control and so on. Message service: it can control connection, hanging off and restartting by message. Ads vertification/pushing: Customer end vertified management by Wifi Dog Protocols. |
Equipment management | Area setting NTP Server setting Copy and storage system setting Recovering the setting information from files Recovery to default setting Software updating Remoting management Restart Reset password |
WLAN security mode | Open System WPA-PSK WPA2-PSK WPAPSK WPA2PSK(combine WPA-PS with WPA2-PSK mode) WPA1WPA2(combine WPA with WPA2 mode ) |
2: Hardware specification
Wireless connector | IEEE802.11b/g/n |
Operation frequency: | 2400-2483.5M |
Main core chip: | Ralink RT5350 |
Antenna | SMA (ourter part is spiral, inner part is hole) |
WIFI transmission speed | 150Mbps |
Outer connector | LAN connector:2 pcs(LAN1 is the self adjustive of WAN/LAN port )
RS232connector:1pcs SIM card slot:1pcs antenna connector:2 pcs indicator:4pcs DC power supply connector:1 pcs reset button:1pcs |
Data speed | 802.11n:upto150Mbps 802.11b:1,2,5,5,11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps |
Transismission power | 11nHT40MCS7:+13.5Bm 11bCCK:+18dBm 11g OFDM: +13.5dBm |
Receive sensitivity | -66dBmat150Mpbs -73dBmat54Mpbs -86dBm at 11Mpbs |
Demension | Long*width*Height:83*66*26mm(excluding antenna interface) |
Power | DC supply power:6-35V 3A |
Comsumption (current) | Smaller than 400mA |
Work environment | Work temperature:-20℃ ~ +75℃ Storage temperature:-40℃ ~ +80℃ humidity: 5%~95%,No condensation |
3: The form of comparative frequency for T260S serial products
Type | Frequency in use |
T260S-A1 | WCDMA/HSDPA/HSUPA/HSPA+:900MHz/2100MHz GSM/GPRS/EDGE:850MHz/900MHz/1800MHz/1900MHz |
T260S-B1 | CDMA/EVDO 800M: RX:869MHz~894MHz/TX:824MHz~849MHz CDMA/EVDO 1900M: RX:1930MHz~1990MHz/TX:1850MHz~1910MHz |
T260S-DE1 | TD-LTE:BAND38/39/40/41 FDD-LTE:B1/3/7 WCDMA:B1/2/5 TD-SCDMA:BAN34/39 GSM/GPRS/EDGE:B2/3/5/8 |
T260S-DE2 | TD-LTE:B38/39/40/41 FDD-LTE:B1/3/7 WCDMA:B1/2/5 TD-SCDMA:B34/39 WVDO:BC0 CDMA20001X:BCO GSM:B2/3/5/8 |
3:Interface specification
A side
B side
A side :
1.LAN1/LAN2:Standard RJ45 connector;LAN1 can be used as WAN port in the standard router mode.
2.DC Power connector:use 2.1mm round head power connector,Inner”+”.Outer:”-“,the Voltage Output is 6-35V, the power is larger than 10W。
B side:
1、3G/4G/WIFI antenna connector: Sub Miniature A (outer part is helical and the inner part is hole connector)
Indicator :
LAN1/LAN2: The LAN1/LAN2 indicator light is on normally when wire internet connect with LAN1/LAN2 port . The indicator light will be flashing sometimes when data flow come through.
SYS light: SYS light will be on when power is connected .It flashes slowly when system starts normally. It flashes quickly when press reset button .
3G/4G light: It flashes quickly when dial(bridge connection AP) in 3G/4G or WiFi bridge connection mode. It will be on normally when connect successfully.
3. R (reset) button : Press this button for 5 seconds when it is in open state , SYS light will be flashing quickly, restart . After that , Reset successfully.
4. Serial port connector: 2 mm 4 Pin connector. From left to Right is GDN/TX/RX/DC+, DC+ can be used as power output and power input.
5. SIM card slot : self locked slot, the card slot will be popped up when long press yellow button on the right .
4.Outer shape location hole sketch map
T260S Serial Port manual specification
1. Serial service can be devided into order mode and serial transparent transmission mode
a)Serial order mode:Send some orders to wireless router by serial port,we can obtain current time,current web type, current internet total data, current 3G/4G signal strength related information, detailed order can refer to serial port order table.
b)Serial port transparent mode : you can set the ip address and port of server you want to connect,Make 3G/4G router connected with the pointed TCP or UDP server, establish transparent data transmission channel ,realize the data transparent transmission.
C)If set serial service function open when it’s power off, then it’s on serial transparent mode and connect automatically pointed server when it’s power on .
d) If set setial service function closed when it’s power off, then it’s on serial order mode and receive serial mode directly when it’s power on.
e)You just need to sending “+++”if want to back to serial order mode from serial transparent mode. You just need to “ATO” if you want to back to transparent mode from serial port oder mode.
2. Serial transparent mode can be devided into customer end mode and server mode ,
a) Customber end mode is normal use mode, it can connect remote server automatically when power on and can establish transparent data channel .
b) Server mode is detective mode , waiting for customber end connnection.
Only the assigned IP from China telecom is visible IP in public network and it can be used as server. The assigned IP from China mobile communication and China unicom are inside network IP. External network can’t access to, So it can’t be used as server.
c)If you want to be used as a server, it can also use DDNS function. Namely is that fasten a fixed DN with assigned IP casually ,customer end only need to connect this fixed domain name and no worry the IP address frequency.
d)There are many providing DDNS service supplier so far,such as “Oray”,“3322” and so on , Only need apply for related information (such as DN,user name, password) to service supplier and fill in the 3G/4G router setting. 3G/4G router can connect suppliers accordingly and automatically and complete fixed dormain name .
3.If serial function is closed (transparent serial port function closed) ,then the serial port order can come into use.
T260S as customer end and realize serial data transmission
1. Use a computer’s port (Terminal A) and serial connector of T260S(GND/TX1/RX1 from right to left ) connect the serial port of computer .it should be (GND/RX/TX),Namely No.5 foot, No.2 foot, No.3 foot .
2. Use another computer (Server B), Link T260S with Internet line or WIFI, Open web setting of Wirless router (192.168.10.1), Open “system service”, Choose “serial serive” to set
Current state working mode 3G setting LAN setting, WiFi setting Qos management Web security System service Router setting
Virtual service Special application DMZ setting One-to –one NAT Serial service Message service
T260S as customer end and realize serial data transmission
1. Use a computer’s port (Terminal A) and serial connector of T260S(GND/TX1/RX1 from right to left ) connect the serial port of computer .it should be (GND/RX/TX),Namely No.5 foot, No.2 foot, No.3 foot .
2. Use another computer (Server B), Link T260S with Internet line or WIFI, Open web setting of Wirless router (192.168.10.1), Open “system service”, Choose “serial serive” to set
3. Install server serial software in No.B computer. Set server type : TCP server, Server IP address:192.168.10.2, Serial port :5000.Router will search termial euipment automatically and monitor connection successfully. Some software will get IP address automatically and can’t revise, then it enters WEB setting screen, modify parameter of serial service for router. Make server’s IP address accordded with ports one by one .
4.Open super terminal by using A computer,Choose COM1 connection, Pay attention to making Baud and so on parameters same with web setting of router .
5.Now , It can data transparent transmission bettween A and B
T260S is used as server and realize remote data transsimission
1. First,register a DDNS account, then ,we use “oray” to test ,apply for Oray account is szlbt.xicp.net.
2. Enter T260S user managment screen -3G/4G Setting -DDNS,fill in DDNS account information ,make sure the account could be registered successfully.
3.Enter system service -serial port service , Start T260S’s server function
4.T260S connect Internet by China telecom 3G/4G web. Especially explaining, Only China telecom provide external IP in domestic 3G/4G Internet. China unicom and China mobile telecom provide internal IP , We can’t use DDNS
5. Find a computer whatever you want, Ping szlbt.xicp.net, obtain T260S’s IP address. We can obtain IP address (113.113.105.150).
6.Install TCP customer end software on computer. Do related setting .
7. T260S use serial port to connect a computer,open super customer end, then it can obain the data from customer end .