5GIndustrial Route

Home >  Products >  Routers >  Industrial Router >  5GIndustrial Route

All Categorys

Routers
Embedded Router Modules
Industrial Switches
Network Bridge

All Small Categorys

Routers
Embedded Router Modules
Industrial Switches
Network Bridge

5G Netcom 1200M WiFi5 Wireless Router

T-CPE1250S is a high-performance 5G WiFi5 wireless router customized for low-latency and high-speed data transmission scenarios. It integrates 3G/4G/5G, 5G NSA/SA independent networking, LTE carrier aggregation, PCI & band locking, resident mode selection, ESIM/plug-in card switching, dual-band 802.11 AC 1200m WiFi, 10/100/1000M LAN/WAN adaptive network port (WAN port supports WAN/LAN switching), 5G + broadband dual-line backup, flow control, IPv6 and cloud platform centralized management and other features. It provides faster speed, more stable connection and wider coverage, which can meet the needs of high-speed data transmission of families and enterprises, and is suitable for mobile office, family Internet access, small and micro enterprises, short-term rent sharing, commodity stores, exhibition sites and other high-speed Internet access scenarios.

  • Description
  • Parameters
  • Applicationg
Is there a problem?<br>Please contact us to serve you!

Is there a problem?
Please contact us to serve you!

Inquiry

Product characteristics

1、All industrial components design, metal shell, protection grade up to IP30; The anti-electromagnetic interference capability meets the requirements of YD/T968-2010 Requirements and Methods of Measurement for Electromagnetic Compatibility of Telecommunication Terminal Equipment; The overvoltage and overcurrent protection shall meet the requirements of YD/T 993-2006 Technical Requirements and Experimental Methods for Protection against Lightning of Telecommunication Terminal Equipment on simulated lightning impulse, power line induction, power line contact and other indicators, and shall have the protection capability of common mode 6 KV and differential mode 1.5K V; The anti-surge damage capability shall meet the Technical Requirements and Test Methods for Overvoltage and Overcurrent Protection and Basic Environmental Adaptability of Access Network Equipment (YD/T1082-2011). Enhanced heat sink + air duct optimization, no longer downtime due to heating problems in hot summer, fully guarantees real-time, long-term, stable and efficient transmission of user network data, and improves user experience.

 

2、Combined with the hardware and software optimization of HNAT, the wired bidirectional forwarding performance can reach 2Gbps, which greatly improves the data forwarding capability of the equipment, ensures the real-time linear forwarding of user data, reduces the network delay, and improves the network transmission efficiency and user experience.

 

3、3G/4G/5G All-Netcom, 5G supports NSA and SA network architecture, supports 5G NR Sub 6, FDD-LTE, TDD-LTE, WCDMA and other long-distance communication modes, 5G downlink supports 4X4 MIMO, and the theoretical maximum downlink speed of the module can reach 2.2Gbps; LTE downlink supports 2X2 MIMO, and the theoretical maximum downlink speed of the module can reach 600Mbps.

 

4、Built-in ESIM chip and external plug-in card software switching, in multi-card mode, can automatically switch according to built-in rules.

 

5、Provide 802.11b/G/n/AC WiFi 1200 M wireless access, with high-gain antenna, open and unobstructed environment up to 30 meters; It also provides 10/100/1000Mbps wired access, and the standby capacity of the whole machine can reach 64 people.

 

6、Support 3G/4G/5G network access of China Mobile, China Unicom, China Telecom and China Netcom, support APN/VPDN private network card and wired broadband network access; provide wireless broadband and wired broadband online at the same time, and multi-network intelligent switching backup function; With port mapping and DMZ functions, it can realize the function of fast networking in different places.

 

7、Support WPS, WPA/WPA2, SSID hiding and guest network to ensure user data security at all times.

 

8、Built-in cloud management platform, easy access to the platform, to achieve centralized management of routers in batches.

 

9、Built-in quick setup wizard makes it easy to use 5G NR to access WiFi5 high-speed Internet without professional knowledge.

 

10、Adhering to the spirit of craftsmen, the R & D team has been constantly updating its functions to meet the needs of various network environments simply and efficiently. Careful performance optimization ensures the best quality network products and improves the user experience.

Technical Specifications

Hardware specifications

Main chip

SF19A2890 High-Performance Enterprise-Class Chip

QUECTEL 5G RG200U-CN High Performance 5G Module

Main frequency

MIPS architecture dual-core four-thread 1GHz

Memory

128MB

Flash memory

16MB

Wireless technology

2.4G: 300Mbps 802.11 B/G/n MIMO technology;

5.8G: 866.7Mbps 802.11 a/n/AC MIMO technology

Device interface

WAN/LAN 10/100/1000Mbps Adaptive Network Interface * 1

LAN 10/100/1000Mbps Adaptive Network Interface * 1

Type C interface * 1

Nano SIM card (4FF)

Button

One WPS/RST composite key, short press for 1 second to open WPS connection, long press for more than 5 seconds to restore factory settings

Indicator light

PWR、WiFi、4G、5G

Antenna

External dual-band WiFi 2.4G/5G 5dBi glue stick antenna * 2

External 3G/4G/5G 5dBi Glue Stick Antenna * 4

Power source

DC 12V/2A

Operating/storage temperatures

-10℃~45℃/-20℃~70℃

Operating/storage humidity

5% ~ 95% (non-condensing)

Size

230X14 7.5 X2 9.5mm (excluding antenna)

Weight

N/A

  

WiFi wireless specifications

Frequency range

2.4G:2.4~2.4835GHz

5G: UNII-1: 5.15~5.35GHz

UNII-2: 5.47~5.725GHz

UNII-3: 5.725~5.825GHz

Channel distribution

2.4G: 1、2、3、4、5、6、7、8、9、10、11、12、13

5G: 36、40、44、48、52、60、64、149、153、157、161、165

Modulation mode

802.11b: DSSS (DQPSK, DBPSK, CCK)

802.11a/g: OFDM (BPSK, QPSK,16-QAM)

802.11n: OFDM (BPSK, QPSK,16-QAM, 64-QAM)

802.11ac: OFDM (BPSK, QPSK,64-QAM, 256-QAM)

Transmission speed

11 B Max 11Mbps, 11 G Max 54Mbps, 11 n Max 300Mbps, 11 AC Max 864.7Mbps

Receive sensitivity

2.4G:

11b:<-82±1.5dBm @1Mbps,

<-76±1.5dBm dBm@11Mbps

11g:<-82±1.5dBm@6Mbps,

<-65±1.5dBm @54Mbps

11n 20MHz:<-82±1.5dBm@MCS0,

<-64±1.5dBm @MCS7

11n 40MHz:<-79±1.5dBm @MCS0,

<-61±1.5dBm @MCS7

5G:

11a:<-82±1.5dBm @6Mbps,

<-65±1.5dBm @54Mbps

11n 20MHz:<-82±1.5dBm@MCS0,

<-64±1.5dBm @MCS7

11n 40MHz:<-79±1.5dBm @MCS0,

<-61±1.5dBm @MCS7

11ac 20MHz:<-82±1.5dBm @MCS0,

<-57±1.5dBm @MCS8

11ac 40MHz:<-79±1.5dBm @MCS0,

<-54±1.5dBm @MCS9

11ac 80MHz:<-76±1.5dBm @MCS0,

<-51±1.5dBm @MCS9

Transmitting power

11b: 20dBm±1.5dBm@11Mbps

11g: 20dBm±1.5dBm@54Mbps

11n(20/40MHz): 17dBm±1.5dBm@MCS7

11ac(40/80MHz): 17dBm±1.5dBm@MCS9

   

5G module specifications

Frequency band information

5G NR:3GPP Release 15/Release 16 NSA/SA

operation,Sub-6 GHz

5G NR NSA:n41/78/79

5G NR SA:n1/28/41/77/78/79

LTE-FDD:B1/ 3/ 5/ 8

LTE-TDD:B34/ 38/ 39/ 40/ 41

UMTS WCDMA:B1/5/8

5G NR Downlink 4X4 MIMO: N1/41/77/78/79

5G NR downlink 2X2 MIMO: n28

LTE Downlink 2X2 MIMO: B1//3/5/8/34/38/39/40/41

Data transfer rate

(Max.)

5G SA Sub-6: downlink 2 Gbps; Upstream 1 Gbps

5G NSA Sub-6: Downlink 2.2 Gbps; Up 575 Mbps

LTE: downlink 600 Mbps; Upstream 150 Mbps

UMTS: downlink 42.2 Mbps; Upstream 11 Mbps

  

Software function

Working mode

Routing mode

Quantity of belt machine

64 people

Management mode

Chinese WEB remote management/cloud platform remote management and online upgrade

Status

Internet, router, wireless, host network user, guest network user, wired network, 5G network

Network

WAN: Enable wired WAN, network mode (routing mode), networking mode (dynamic IP, static IP, broadband dial-up), DNS settings (automatic acquisition, manual input)

Mobile connection: mobile data switch, data roaming switch, network operator selection, network mode selection

LAN: Local area network settings (intranet address, subnet mask, DHCP server switch, start address pool, end address pool), network address pool

Wireless

Wireless settings: dual-band switch, 2.4G (switch, SSID name, encryption mode, SSID password, hidden SSID switch), 5G (switch, SSID name, encryption mode, SSID password, hidden SSID switch)

RF settings: 2.4G (wireless protocol, channel bandwidth, operating channel, power), 5G (wireless protocol, channel bandwidth, operating channel, power)

Black and white list: black and white list based on SSID

WPS: band selection (2.4GHz, 5GHz), WPS switch

Advanced settings

Guest network: LAN isolation switch, guest network duration, 2.4G (switch, SSID name, encryption mode, SSID password), 5G (switch, SSID name, encryption mode, SSID password)

APN settings: APN list, add/delete/modify APN

PIN management: PIN switch, PIN code

SIM open management: single card mode, multi-card mode

IPv6: Function switch, WAN (networking mode, DNS address), LAN (specified type)

Network Diagnostics: ping, Tracert

System management

System time: current time modification, immediate synchronization switch, time zone selection, network time automatic synchronization switch, NTP server input

Change password: change the WEB login password

Backup/restore: backup and import (backup configuration information, import configuration information), restore factory settings

System upgrade: local upgrade

System restart: immediate restart and scheduled restart

System log: refresh, clear, export

IP probe: IPv4 trace address modification, IPv6 trace address modification

Setup Wizard

Time Zone-5G-WiFi-Overview

  

Product Dimension Drawing

 

Packaging Information

T-CPE1250S * 1, DC 12V/2A power adapter * 1, network cable * 1, manual (including warranty card)

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000

If you have any suggestions, please contact us

CONTACT US
Committed to making the best products

Copyright © 2024 Shenzhen Libtor Technology Co., Ltd.  -  Privacy policy
粤ICP备11103969号